Semco Teak Sealer Natural 3.78 Litre
Many modern yachtsmen, cruise ship operators and teak furniture owners have sought methods of restoring and maintaining the natural beauty of their teak wood. SEMCO Teak Sealer is a solvent based teak finish with water-like viscosity containing pigments, mildewcide, UV inhibitors and moisture protection. SEMCO does not contain silicone, varnish, polymers or exotic oils. and is used to preserve the teak in its natural colour .When SEMCO Teak Sealer is properly applied to teak, the wood will look as if it has nothing on it, yet it will not turn grey or support the growth of mildew. Surface soil can be washed away with mild detergent, and with seasonal recoating the teak will be preserved in its natural state for many years.
Teak is unmatched in its beauty and durability. With little care it will last many years, with a little SEMCO it will remain looking like new as well. SEMCO works in a similar fashion on other types of wood such as Iroko, Mahogany, Redwood, Ash, Jatoba, Ipe and Butternut. SEMCO Teak Products are used in many commercial applications such as outdoor restaurants, hotels, cruise ships, theme parks and some very special residences that have teak doors and trim details. SEMCO is also used by many manufacturers of boats, furniture and canoes.
To apply SEMCO Teak Sealer the wood must be completely dry. Shake the can or stir the contents to thoroughly mix the SEMCO. SEMCO Teak Sealer has a water-like consistency, appearing opaque in the can. Apply the SEMCO to the teak using a foam brush applicator allowing the wood to absorb as much as it wants. There are no brush strokes or lap marks to be concerned with. When the first coat is complete, a second coat can be applied immediately. Always apply both coats in the same day. Use a rag to wipe any excess from the wood after each coat. Two coats as an initial application should be sufficient in most cases, as more coats will mask the grain of the wood. The teak will be dry to the touch in an hour and ready for service the next day. Cool, cloudy or damp weather will slow the drying time. A plastic spray bottle eases application to furniture.
When SEMCO Teak Sealer is applied to the teak and it has had a week or two to weather, the wood will appear as if it has "nothing" on it, yet the teak will not turn gray or allow the growth of mildew. After cleaning and sealing with SEMCO the first time, an occasional cleaning with soap and water and a single fresh coat of Sealer applied seasonally will keep the teak looking great for years to come. If water dashed on the surface beads up, then the SEMCO is still working and does not need re-coating. Avoid applying SEMCO too often as the finish will build up and mask the grain of the wood. A harsh environment or higher usage may shorten the intervals of maintenance required.
As a rule of thumb, 1L of sealer will cover 5sqm of teak flooring or a 1.2m table and 6 chairs with the recommended first two coats.