Description
LANOTEC MGX Marine Grade Penetrant & Lubricant
LANOTEC MGX is available in 300g Lube and 600g Spray. Made with natural lanolin, it penetrates, lubricates and protects marine equipment against moisture, salt and corrosion.
Key Features
- Available in 300g Lube and 600g Spray
- Marine-grade penetrant, lubricant and corrosion inhibitor
- Natural lanolin-based formulation
- Resistant to acids and salts
- Highly resistant to wash-off
- Penetrates deep into metal surfaces
- Repels moisture with a protective barrier
- Prevents galling between dissimilar metals
- Non-conductive to 70kV
- Safe on rubber and plastics
- Non-flammable
- Biodegradable
- Food Grade and suitable for marine-sensitive areas
- Salt spray tested to AS2331.3.1
- NSF, HACCP and Global GreenTag certified
Ideal Uses
Highly effective for lubricating and protecting:
- Steering cables, linkages and hinges
- Inboard legs, drive shafts and outboard brackets
- Chains, wire ropes, shackles, trailers and winches
- Engine mounts and pumps
- Moorings, canopy frames and rivets
- Locks, nuts and bolts as an anti-seize
- Electrical cabinets, wiring connectors and battery terminals
- Electronics and sensitive communications equipment
- Crevices and cavities requiring moisture and corrosion protection
Application
Shake thoroughly before use. Colder climates may require additional agitation to ensure the product is properly mixed.
The 300g Lube can be applied by spray, brush or roller. The 600g Spray provides convenient aerosol application. Apply to clean, dry surfaces and allow approximately one hour before exposing equipment to water.
Storage & Transport
Aerosols are classified as Dangerous Goods for transport and storage (UN 1950; DG 2.2 2YE). Other sizes are classified as non-DG.
Store in a cool, dry and well-ventilated area. Keep out of reach of children.
