Description
Scepter Fuel Pick-Up Manifold Assembly – For 25L Scepter Fuel Tanks
Premium fuel pick-up manifold assembly designed for reliability and long-lasting performance. Crafted from high-quality materials and engineered using advanced technology, this manifold meets the needs of marine enthusiasts while providing excellent value. Specifically compatible with 25L Scepter Fuel Tanks.
Features:
-
Thoughtfully designed for the marine industry
-
Engineered to be eco-friendly
-
Ideal for various adventure and boating needs
-
Durable construction ensures years of reliable use
-
OEM Choice quality at an affordable cost
Includes:
-
Fuel Pick-Up Manifold
-
Flange
-
Gasket
-
Screws
-
Washers
Installation Instructions:
Requires TX25 Torx Screwdriver
Important:
-
Ensure the fuel tank is clean and free of debris.
-
Do not use power tools to remove or install the gasket—this may damage the tank or components.
-
If the fuel pick-up assembly is damaged before, during, or after installation, it must be replaced.
Step-by-Step Guide:
-
Remove all four screws and washers from the fuel pick-up using a TX25 Torx screwdriver. Discard old screws and washers.
-
For gasket replacement only: Lift the fuel pick-up slightly and remove the old gasket.
For full replacement: Lift the fuel pick-up completely and remove both the gasket and assembly. -
Inspect the tank’s gasket surface and clean it if necessary.
-
Inspect the new gasket to ensure it is free from debris or damage. Install the gasket by sliding it over the fuel pick-up. Ensure correct orientation—the gasket is rectangular.
-
Lower the fuel pick-up into place, ensuring the float functions properly. Hand-thread the four new screws with washers at least one full turn.
-
Using the Torx screwdriver, gently tighten all four screws until they touch the fuel pick-up surface.
-
Tighten each screw one full turn, using the screw slot as a reference, and check all screws a second time to ensure secure installation.
