Product Description
Norglass Norflex Epoxy Filler 750g
Description:
A two part Epoxy/Polyamine/Polyamide filler. Characterized by high strength, non shrinking, low sag, resistance to chemicals and excellent adhesion to timber, metals, concrete, fiberglass and other materials.
Uses:
For filling gaps, holes and imperfections in most surfaces. Ideal for use as a fairing filler on large areas because of its ability to flex with the substrate. Offer a 30% weight saving by mass over NORFILL.
*A perfectly clean and dry surface is essential for maximum adhesion. Where used on metal surfaces the substrate must be adequately primed and sealedbefore cosmetic fairing takes place.
Instructions:
- Place 2 equal parts of NORFLEX base onto a flat mixing board and position an equal 1 part of NORFLEX hardener alongside.
- When assessed that all 3 piles are of equal value, blend together thoroughly until well mixed then apply with a rubber squeegee or filling knife.
- Allow overnight to cure before sanding.
- When final fairing is achieved the NORFLEX will need to be overcoated with the appropriate primer to obliterate the texture and fill minor cavities.
Precautions:
Frequent or prolonged skin contact with either component may produce irritation. Avoid contact with skin and eyes. Avoid breathing its vapours. If allergic reaction occurs, cease using this product immediately and remove from the
area.
