Product Description
Clear Start Race Watch Blue
The ultimate accessory in on water performance by Ronstan. Every aspect of racing is covered, countdown, stopwatch, re-sync as well as everyday functions.
Accurate measurement of elapsed time to 59 minutes and 59 seconds with the touch of a button
Clear Start watches come pre-programmed with 4 standard period options; 1 minute, 3 minute, 5 minute and the ISAF 5,4,1,0 sequence. It is also possible to choose multiples of 5 and 1 minutes. A sound signal is given each minute and at the last 50, 40, 30, 20 seconds inn countdown mode as well as each of the final 15 seconds. These alarms signals are unique for each of the nominated time points so that time remaining can be identified without looking at the watch, or the sound signals can be turned off if required.
Countdown Repeat or Count Down and Up Timer
Counts down from a start time specified by you. Clear Start watches can be set to either auto repeat the countdown at the end of the cycle, or to begin counting up (elapsed time).
Synchronise Function
This handy function allows you to resynchronise with if you feel you were slightly late initiating countdown on the preparatory signal of if you missed it all together. At the press of a button the timer will drop down to the next full minute allowing you to get your starting sequence quickly in perfect unison with the official starter.
12/24-hour Timekeeping
Times can be displayed in either 12-hour or 24-hour format.
Water Resistant
The "ATM" value indicates the number of atmospheres to which water resistance is ensured. Watches marked 5ATM have the same water resistance as "50m" watches. Watches marked 10ATM have the same water resistance as "100m" watches.
Battery
All Clear Start watches use a readily available 3.0 volt CR2032 Lithium battery. Note – the battery should only be replaced by a qualified watchmaker/service centre.
