Rule Bilge Pump 1100gph - Automatic
The 'S' series automatic sensing RULE bilge pumps work on the principle of impeller resistance. The pump turns on every 2 1/2 minutes for about 1 second to sense for water. If water is present, the pump will sense resistance at the impeller and continue to run until water is removed.
New generation compact submersible 1100 GPH Automatic Sensing electric bilge pump - no float switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base.
This pump is extremely efficient, draws low current and offers high capacity output in a very compact housing to fit into the smallest available space.
Note: using the included check valve will reduce the output flow of the pump.
3 year limited warranty.
- 1100 US gallons per hour - 69 litres per minute
- Height: 120mm, Width: 74mm, Depth: 64mm
- Fully submersible
- 12 volt DC - low 3.7 amp draw
- Hose outlet suits 20mm (3/4") hose.
- Back flow prevention
- Built in thermal cut off
- Threaded Discharge port
- Hidden air vents